cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1117
Views
5
Helpful
2
Replies
kapydan88
Participant

Auto NAT on FTD 1000 series with 6.6.1 vesrion

Hello for everybody.

 

Not so far away we updated our FMC and FTD from 6.4.0 to 6.6.1 software version.

 

Today, when trying to add auto nat rule for the test network, I faced the following problem.

 

Auto nat rules can not be configured on more than one source or destination Interface.Please use Interface Objects having one interface mapping per device.

 

After reading config guides, I could not understand - is this some bug or feature of the software, because on version 6.4.0 everything worked correctly...

2 REPLIES 2
kapydan88
Participant

Resolve this problem. It turned out that two interfaces belong to the same security zone.

Dinesh Moudgil
Cisco Employee

Hi,

 

You are running into https://cdetsng.cisco.com/summary/#/defect/CSCvm65637

 

 

Thank you,

Dinesh Moudgil

 

P.S. Please rate helpful posts.

Cisco Network Security Channel - https://www.youtube.com/c/CiscoNetSec/
Content for Community-Ad