02-10-2021 11:28 PM
Hello for everybody.
Not so far away we updated our FMC and FTD from 6.4.0 to 6.6.1 software version.
Today, when trying to add auto nat rule for the test network, I faced the following problem.
Auto nat rules can not be configured on more than one source or destination Interface.Please use Interface Objects having one interface mapping per device.
After reading config guides, I could not understand - is this some bug or feature of the software, because on version 6.4.0 everything worked correctly...
02-11-2021 12:19 AM
Resolve this problem. It turned out that two interfaces belong to the same security zone.
02-11-2021 12:38 AM
Hi,
You are running into https://cdetsng.cisco.com/summary/#/defect/CSCvm65637
Thank you,
Dinesh Moudgil
P.S. Please rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide