Auto NAT on FTD 1000 series with 6.6.1 vesrion

[kapydan88]

Hello for everybody.

Not so far away we updated our FMC and FTD from 6.4.0 to 6.6.1 software version.

Today, when trying to add auto nat rule for the test network, I faced the following problem.

Auto nat rules can not be configured on more than one source or destination Interface.Please use Interface Objects having one interface mapping per device.

After reading config guides, I could not understand - is this some bug or feature of the software, because on version 6.4.0 everything worked correctly...

[kapydan88]

Resolve this problem. It turned out that two interfaces belong to the same security zone.

[Dinesh Moudgil]

Hi,

You are running into https://cdetsng.cisco.com/summary/#/defect/CSCvm65637

Thank you,

Dinesh Moudgil

P.S. Please rate helpful posts.