Hi guys,I have a query regarding CISCO FMC Access Control Rules.I use my Radius Account to login to FMC and also my colleagues. I have done some changes in the past but I already commited that changes I made before.Now, I need to do another change on...
Forum Posts
Dear Cisco Community,I hope this message finds you well.I am currently working on configuring Wake on LAN on a Firepower 1000 series device and could use some guidance on the required steps, including NAT configuration. Here are the details of my ne...
Good Morning,Could someone please help me figure this out?I want hosts on 192.168.190.0 /24 (VLAN 10) to be able to have tcp communication with our screened subnet (VLAN 50) 172.20.33.0 /24 on certain ports, and blocking the rest with an ACL on the A...
Hello Everyone,We are trying to get a SQL cluster node to communicate on UDP 3343 from a host attached to our "DMZ" interface, to a host on our Inside interface. Packet tracer is saying the packet is dropped due to an ACL, but ive cleaned up our ACLs...
Hello! I have run into a problem with pings. I have 3 networks on 3 vlans: students, servers and admin.Students network is 192.168.1.0, servers network is 192.168.2.0 and admin network is 192.168.3.0.The following config is working as intended except...
Resolved! ACL on switch in router on a stick
Hello! I have set up a simple network with 3 networks and I want to deny access to a server on a different subnet.I have tried setting up ACL on the router and the switch without success.Is this possible?Thanks!
Resolved! Cannot ping outside from ASA 5510
Cannot ping outside from ASA 5510 Network Topology Problem Description"ping" only got timeout error between Router(10.1.1.1) and ASA5510(10.1.1.10)Any two devices can ping each other except them.And ASA cannot ping the Internet too. I Have TriedReb...
Hi, I'm trying to test the connectivity on my current network setup on the FPP1120 device. But cannot make a successful ping from outside to inside host (inside to outside is working fine). I'm just wondering if ICMP is blocked by default from outsid...
I am facing issues in connecting a pc from outside interface to dmz interface on cisco 5505 asa firewall. The icmp ping is successfull from outside pc to dmz server but failed to establish any tcp connection.ASA Version 8.4(2)!hostname ciscoasanames!...
Resolved! SSH to a specific host IP
Hi all,I'm trying to limit SSH access to my router.Router IP is 192.168.1.254 My access list for SSH: ip access-list extended SSH_Access_Controlpermit tcp 192.168.1.0 0.0.0.255 any eq 22deny tcp any any eq 22 log!line vty 0 4access-class SSH_Access_C...
