Network Security

Hi All,I am newly building trustsec in my environment,trying to add one of the switch under trustsec. Have configured Trustsec settings and COA on the ISE for the switch and added the appropriate aaa commands , radius servers and cts commands.But sti...

Hello! Does anyone know if there's an easier way to configure and create rules that require manual entry in the FMC policy creation dashboard? We are working on a migration from the ASA which has over 300 rules and our company would also like to reca...

Hello allI'm receiving hundreds of warning messages i am getting in our syslog from our Cisco ASA 5516-x. The warning message are on below same as screenshots and dunt know how to act with these kind of massages as its huge numbers of massages coming...

Has anyone tried to setup the Azure monitoring agent to on-premises Cisco devices so that they can be monitored on Azure? Please kindly let me know the procedure/necessary configuration if anyone has done this successfully.

I am trying to follow a guide on configuring some mPSK authorizations for some aruba AP's and the guide is in an older version of ISE and I almost have it figured out on the newer GUI, but hit a roadblock. Guide: https://www.wifireference.com/2017/12...

A critical vulnerability has been identified in a widely used software application across the network. Please which technical tools and procedures can I employ to coordinate and execute a system wide update to patch this vulnerability?

We have recently deployed umbrella, couple of our users are having issues opening a Citrix receiver (for a third party connection)  when they're off-site (connected by Anyconnect with umbrella module) - When the users are in the office and on the cop...

I was able to manually backup our FTD to our TFTP server using the following command on CLI.  I am trying to find out how I can schedule this automatically rather than manually doing it but can't find a good resource for the TFTP method.  Anyone know...

Hello, for reasons of compliance we are required to syslog URL visited.With the config below (not full) I am able to see the IP visited, and this only for http.Is there a way to syslog the http and https URLs ?parameter-map type urlf-glob PERMITTEDSI...

I need to disable the TLSv1.1 on ASA FDM 5516x and i have already disable the TLSv1.0 & 1.1 from SSL Settings via GUI & then according to the below showing command results i still can see TLSv1.1 still active  > show sslAccept connections using SSLv3...

CISCO Secure Web Appliance "CSWA" . it have an engines for Cloud Access Security. on the book OCG 350-701 page 643it talk about that, but it is about 3 line and I am really lost. my question is Cisco Clouldlock is part of CSWA, or it just send the in...

Hi Experts, ISE deployment: 1 Node (PAN/MNT) | 1 Node (PSN) [version 3.2.0.542 patch 3] I've setup everything as per the guidelines.  How To: Agentless Posture Configuration, validation & Troubleshooting - Cisco Community I've attached the errors. Ev...