rtr 1 rtr 2
| 10.10.10.0/24 |
ASA_active ASA _standby
My scnenario is this, I have two ASA configured as active/standby and connect to two routers (rtr1, rtr2) on the provider side.
Between them they are on the same subnet as shown here.
Can I configure the ASA with two default routes here?
route outside 0.0.0.0 0.0.0.0 10.10.10.1
route outside 0.0.0.0 0.0.0.0 10.10.10.2
Would this work?
Do you see any issue?
Go to Solution.