Hello, I received the following mail to open ports and do port forwarding and natting , but these are for Cisco IOS routers and so they don't work on the ASA , can anyone help me transform them for a asa ? Also what interface is BVI1 meant by, or is it just a name like any other ?
Udp 5060 -> 10.0.0.15:5060
Udp 49152 à 53246 -> 10.0.0.15 (same ports)
Udp 5001 -> 10.0.0.15:5001
Tcp 2222 -> 10.0.0.15:2222
UDP 1194 ->10.0.0.15:1194
Commands for the cisco :
ip nat inside source list 101 interface BVI1 overload
ip nat inside source static udp 10.0.0.15 5060 interface BVI1 5060
ip nat inside source static udp 10.0.0.15 5001 interface BVI1 5001
ip nat inside source static tcp 10.0.0.15 2222 interface BVI1 2222
ip nat inside source static udp 10.0.0.15 1194 interface BVI1 1194
access-list 101 permit udp any host 10.0.0.15 range 49152 53246
To disactivate the nat sip helper :
no ip nat service sip udp port 5060