01-30-2011 04:56 AM - edited 03-11-2019 12:42 PM
I have a CISCO ASA 5520 with ASA version 7.0(8) and ASDM version 5.0(8) I need to upgrade this to ASA Version 8 and ASDM Version 6.
I know I am not supposed to upgrade directly to those versions.
But do I have to upgrade to each available upgrade first before getting to versions 8 and 6 respectively?
Thanks,
Rabih
Solved! Go to Solution.
01-30-2011 07:17 AM
Hello,
You can upgrade if you dont have any configuration on it. If you have configuration, you can go from 7.0 to 7.2 and from there go to 8.0. ASDM is no issue, you can go from 5 to 6 with no problems.
Here is a link for reference
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml
Let us know.
Mike
01-30-2011 07:17 AM
Hello,
You can upgrade if you dont have any configuration on it. If you have configuration, you can go from 7.0 to 7.2 and from there go to 8.0. ASDM is no issue, you can go from 5 to 6 with no problems.
Here is a link for reference
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml
Let us know.
Mike
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: