08-30-2016 08:15 AM - edited 03-12-2019 01:12 AM
Hi All,
I am looking to export our firewall rules from the ASA into a excel sheet.
When doing so the the source IP changes into the name, does not provide me with multiple names for the rule that are setup, I do not get multiple IP addresses.
Is there a tool I can use so I can see the rules setup on the Inside, Outside, DMZ and Global interfaces?
Thank you
Solved! Go to Solution.
08-30-2016 11:01 AM
I'm not positive exactly how you want to see the output but have you looked at how the output is formatted when you use "show access-list" (not "show run ...").
That command will give you both the object names and IP addresses (and tcp/udp port numbers for service objects) that comprise those names.
08-30-2016 11:01 AM
I'm not positive exactly how you want to see the output but have you looked at how the output is formatted when you use "show access-list" (not "show run ...").
That command will give you both the object names and IP addresses (and tcp/udp port numbers for service objects) that comprise those names.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide