Cisco ASA Advanced Inspection and Prevention (AIP) Security Services Module

[RAINER PARZER]

Hi Community

Hope you can help me.

The automatic Signature Update from Cisco.com worked fine on my IPS modules in the past.

Then i updated to 7.3(2)E4 and now it wont update.

Error Message is: AutoUpdate exception: Unknown HTTP exception

Directory: https://www.cisco.com//cgi-bin/front.x/ida/locator/locator.pl

Any Ideas why this happens?

Cisco Intrusion Prevention System, Version 7.3(2)E4

Host:                                                       
    Realm Keys               key1.0                         
Signature Definition:                                       
    Signature Update         S825.0            2014-09-25   
    Threat Profile Version   8                              
OS Version:                  2.6.29.1                       
Platform:                    ASA5525-IPS                    
Serial Number:               FCH18087MNT                    
Licensed, expires:           16-Apr-2017 UTC                
Sensor up-time is 5 days.
Using 2992M out of 3484M bytes of available memory (85% usage)
system is using 32.4M out of 160.0M bytes of available disk space (20% usage)
application-data is using 86.0M out of 385.9M bytes of available disk space (23% usage)
boot is using 63.4M out of 77.1M bytes of available disk space (87% usage)
application-log is using 19.3M out of 513.0M bytes of available disk space (4% usage)

MainApp            C-2014_04_14_22_11_7_3_1_48   (Release)   2014-04-14T22:15:32-0500   Running   
AnalysisEngine     C-2014_04_14_22_11_7_3_1_48   (Release)   2014-04-14T22:15:32-0500   Running   
CollaborationApp   C-2014_04_14_22_11_7_3_1_48   (Release)   2014-04-14T22:15:32-0500   Running   
CLI                C-2014_04_14_22_11_7_3_1_48   (Release)   2014-04-14T22:15:32-0500             

Upgrade History:

  IPS-K9-7.3-2-E4   17:25:07 UTC Wed Jan 15 2014   

Recovery Partition Version 1.1 - 7.3(2)E4

Thanks a lot!

[RAINER PARZER]

not ideas so far?

does nobody have the same problem?

[Jordi Benet]

Hi,

same issue here with the same OS version :(

connection is open between the Cisco servers and our IPS.

We are using a 5585-X SSP40 IPS module.

If we find something I will let you know, but will probably downgrade again.

thanks.

Regards,

J

[RAINER PARZER]

do you use a proxy to access the internet?

it seems that there is a problem with the proxy config!

we used a proxy to access the internet, and it worked over months.

now i access internet without a proxy and it works fine!