CISCO ASA - configure Inspection Traffic

[rkspillai]

HI 

How do we enable inspection traffic for h.323 and SIP on my Cisco ASA 5500 (ASA Version 8.4(7)3) via Cisco security manager (4.7).

We have other traffic inspection enable currently. We know the process via CLI would like to do it via CSM due to organisational constrain

cheers

Rame

[Vibhor Amrodia]

Hi,

Open the CSM Client , Select the ASA device on which you would like to configure the policy on.

Select the policies for this ASA device on the left hand side , go to Firewall >> Inspection Rules and then you would be able to add the inspection for these protocols from there.

Thanks and Regards,

Vibhor Amrodia