Hi
If anyone use Ipswitch Whatsup to collect netflow from Cisco ASA?
The attachment is the result of my test. I found the traffice would be double.
The Cisco ASA (ASA 5505, 9.X) adn netflow setting below:
flow-export destination inside 192.168.1.100 9999
flow-export template timeout-rate 1
flow-export delay flow-create 60
access-list netflow-export extended permit ip any any
class-map netflow-export-class
match access-list netflow-export
policy-map global_policy
class netflow-export-class
flow-export event-type all destination 192.168.1.100
service-policy global_policy global
I really appreciate your patience and advice.