07-21-2010 03:52 AM - edited 03-11-2019 11:14 AM
Hi
A very simple question i think. Can i vew traffic in the realtime viewer in ASDM 6.1 for just a specific port? Im trying to see traffic on port 25 but i dont know the filter i need to put in. If i put 25 in there i get too much info with anything including the number 25 etc. If i put TCP 25 i see nothing. Also tried SMTP and nothing.
Sorry for such a basic question, hope someone can help.
Thanks
Rob
Solved! Go to Solution.
07-21-2010 08:10 AM
Hi Rob,
You can use some basic regex to help clean up the output. Try this:
/25[^0-9]
This will match things like /25) or /25
Hope that helps.
-Mike
07-21-2010 07:14 AM
Hello,
Can you try "/25" instead of "25" and see if that helps?
Regards,
NT
07-21-2010 07:37 AM
Hi NT
Thanks for the reply.
That seems to produce better results in that it shows only ports that includes 25 in them, so its better but i just want to see SMTP so only port 25.
There are still a lot of logs going through that have the number 25 in the port and its hard to spot the ones that are only port 25. But if this is the best im gonna get then its better than what i had before.
Thanks for your time
Rob
07-21-2010 08:10 AM
Hi Rob,
You can use some basic regex to help clean up the output. Try this:
/25[^0-9]
This will match things like /25) or /25
Hope that helps.
-Mike
07-21-2010 08:19 AM
Excellent thats produced the results i wanted, thanks very much Mike thats perfect!
Also thanks to NT for contributing his part!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide