09-28-2012 01:36 AM - edited 03-11-2019 05:00 PM
Hello,
I recently upgraded the ios image and the asdm on a cisco 5520 firewall. I use a policy on a cisco security manager to push policys out to this firewall. But it cant push to them now because the image has changed on the device.
Is their anyway to re - assign the policy without having to do a new discovery.
regards,
Kevin
Solved! Go to Solution.
10-08-2012 12:41 PM
I believe you can right click on the device choose Device properties >> General >> OS Version
change it and save it and then try to deploy.
-Kureli
10-08-2012 12:41 PM
I believe you can right click on the device choose Device properties >> General >> OS Version
change it and save it and then try to deploy.
-Kureli
10-10-2012 01:03 PM
Kureli,
Think you are right. I was then able to push the previous policy back out to the two asa devices again. Job done.
thanks,
Kevin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide