cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
882
Views
0
Helpful
2
Replies

Cisco VPN Client issue while changing the vpn pool

vinodk_gupta
Level 1
Level 1

Hi,

We have already implemented Cisco client VPN service on Cisco ASA. My Cisco VPN ip pool is configured 174.26.4.0/22 & My corporate network pool is 172.26.4.0/22. which is working perfectly.

My concern is VPN pool 174.26.4.0/22 is comes under public range so i want to change this pool into private range (172.30.100.0/24)

so i changed below configuration.

no access-list nonat extended permit ip 172.26.4.0 255.255.252.0 174.26.4.0 255.255.252.0
no ip local pool testpool 174.26.4.0-174.26.4.253

access-list nonat extended permit ip 172.26.4.0 255.255.252.0 172.30.100.0 255.255.255.0
ip local pool testpool 172.30.100.1-172.30.100.254

After changing, i am able to connect vpn & vpn machine got ip address 172.30.100.1.

during VPN connection, vpn machine (172.30.100.1) is pinging from corporate network & even take the remote also but from VPN machine (172.30.100.1) I am not able to ping corporate network.

i am not able to understand where is my mistake?

Please help us

Regards

vinod Gupta

9810966625

2 Replies 2

joseph.steve
Level 1
Level 1

Paste your full configuration

Config will definitely help but did you check if the VPN client getting corp network routes? Check the splittunnel settings.

thx

MS 

Review Cisco Networking for a $25 gift card