03-11-2009 05:01 AM - edited 03-11-2019 08:03 AM
Hi,
I have an ASA 5510 just added to my network.
I have an internet router(connecting to the outside interface of the ASA) and the following interfaces: inside,DMZ1 and DMZ2.
I have the followings: LAN network connecting to the inside interface,server1 connecting to the DMZ1 and server2 connecting to DMZ2.
I want 2 users from the internet to connect to the 2 servers(user 1 connects only to server1,user 2 connects to server1)via VPN and I also want my LAN users to connect to server 1.
Can someone please help me with the configuration guide that will help me achieve this.
Thanks in advance.
03-13-2009 04:39 AM
Hi,
You can achieve the setup thru configuring ipsec vpn client. For the users in your inside lan to access server 1 in DMZ1, you just need nat / pat and make sure to permit the traffic if you have ACLs configured. If it's possible to upload your current config with the servers' ip then I could help further with details.
03-13-2009 05:47 AM
Hello Can you please help me with the links to config guides on ipsec vpn client configuration or clientless vpn configuration.
Thanks
03-13-2009 11:14 AM
Hi Oluwaseyi,
Check out these links, which will walk you through each of the different VPN configurations on the ASA:
ASA 7.2:
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/ike.html
ASA 8.0:
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/ike.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide