deployment failed due to conflict with ongoing prevlous deployment

[Eccom-TAC]

when configuration the Static routing on the ASA to FMC , it cannot deploy to FTD2110. after on the FMC configuration is distributed to the FP , not issued by success, error screenshot below

deployment failed due to conflict with ongoing prevlous deployment. if problem persists after retrying, contact cisco TAC

[yasirirfan]

Hi Xuehau

Try to clear any pending tasks from Deploy > tasks tab and the try. It should work.

Cheers

Yasir

[Raghunath Kulkarni]

Hi Xiehau,

This usually happens due to the CD_STATE (one of the internal flag files) being inconsistent which leads to this issue being reported.

It requires making certain changes from the root account of the FTD units, hence i would recommend if you open up a TAC case the engineer should be able to fix it quickly.

P.S: We could have done it here but since it needs information from the device to avoid data being shared publicly lets open a SR

[Miguel52]

Hi, 

I solved this problem restarting the manager service in expert module on FTD

>expert
Password:
firepower:/home/root# pmtool restartbyid ngfwManager