cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
184
Views
0
Helpful
1
Replies

Destination NAT is not working after 9.1 Upgrade

Hi,

After the firewall upgrade , we are facing problem with Destination NAT. Can someone tell me how to write a destination NAT in 9.1 version.

Source : Any

Destination : 10.60.32.17

Need to be translated to the destination IP : 10.60.32.140

Regards

Alexander Moorthy

1 Reply 1

pradypan
Cisco Employee
Cisco Employee

Hi Alexander,

Can you please share your configuration for which you are observing the concern.

We can just configure a static mapping for the IP addresses on the ASA. Please find the below document for your reference.

http://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/firewall/asa_91_firewall_config/nat_objects.html#pgfId-1106703

Please find below configuration example for your reference.

object network obj_10.60.32.140
 host 10.60.32.140
object network obj_10.60.32.17
 host 10.60.32.17

object network obj_10.60.32.17
 nat (inside,outside) static obj_10.60.32.140

Regards,

Pradyumna

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: