06-12-2013 01:40 PM - edited 03-11-2019 06:56 PM
Hello Everyone,
I need configure destination NAT in my ASA 8.2 version only for a specific origin.
Today, the network 10.84.25.0/24 access the web server with IP 172.17.3.150, i need nat the IP 172.17.3.150 to 10.96.202.10 only for
10.84.25.0/24 network.
How i can configure this in 8.2 version?
Tks!
Solved! Go to Solution.
06-12-2013 01:56 PM
Hi,
I am not quite sure how the setup is on your ASA currently but the following configuration option came to mind
access-list DMZ-SERVER-POLICYNAT remark Policy NAT for DMZ Server
access-list DMZ-SERVER-POLICYNAT permit ip host 172.17.3.150 10.84.25.0 255.255.255.0
static (dmz,inside) 10.96.202.10 access-list DMZ-SERVER-POLICYNAT
Hope this helps
- Jouni
06-12-2013 01:56 PM
Hi,
I am not quite sure how the setup is on your ASA currently but the following configuration option came to mind
access-list DMZ-SERVER-POLICYNAT remark Policy NAT for DMZ Server
access-list DMZ-SERVER-POLICYNAT permit ip host 172.17.3.150 10.84.25.0 255.255.255.0
static (dmz,inside) 10.96.202.10 access-list DMZ-SERVER-POLICYNAT
Hope this helps
- Jouni
06-13-2013 09:08 AM
Hi Jouni,
Tks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide