Does FPR1010 base box support SSL VPN ?

[Akshatha0911]

Hi Team,

Does FPR1010 base box support SSL VPN , if yes how many qty?

Thanks,

Akshatha

[Rob Ingram]

Hi @Akshatha0911 

The FPR1010 supports 75 VPN peers.

You will need a Remote Access VPN license, such as AnyConnect Apex, Plus or VPN only license. The minimum qty for AnyConnect license is 25 users.

[Akshatha0911]

Hi Rob,

Any built in SSL licenses in FPR1010 , earlier ASA5506 / 5512 models use to support built in 2 nos of SSL.

Thanks,

Akshatha

[Rob Ingram]

Hi @Akshatha0911 

Unfortunately not, you'll need to purchase licenses before using RAVPN on FTD.

[Akshatha0911]

Hi Rob,

FPR1010-ASA-K9 with ASA Image also wont support builtin SSL ?

Regards,

Akshatha

[Rob Ingram · Accepted solution]

Yes it will support SSL-VPN, maximum 75 VPN peers.

And as it's ASA software you will get 2 RAVPN licenses.

Datasheet: https://www.cisco.com/c/en/us/products/collateral/security/firepower-1000-series/datasheet-c78-742469.html

[engineer467]

Hi Rob,

I know it's a very old discussion, hoping you see this and reply

Can we apply a 150 anyconnect user license to the 1010 firepower? I read somewhere that it will support but there will be network degradation issues. Can you please share your views on this?

Thank you in advance!

[Rob Ingram]

@engineer467 no I don't believe it will support 150 users. 

The datasheet confirms the 1010 supports 75 VPN peers, which I believe is IPSec or SSL VPN. https://www.cisco.com/c/en/us/products/collateral/security/firepower-1000-series/datasheet-c78-742469.html