Dual active DSL line issue

[larbi farouk]

Hello, We try to use our both dsl line at the same time using load charing with PBR on ASA firewall 9.5

PPPOE interface Config

interface GigabitEthernet0/2
 nameif outside
 security-level 0
 pppoe client vpdn group ADSL1
 ip address pppoe setroute
!
interface GigabitEthernet0/3
 nameif outside2
 security-level 0
 pppoe client vpdn group ADSL2
 ip address pppoe setroute

Last commande add default route in routing table

S* 0.0.0.0 0.0.0.0 [1/0] via 160.96.80.1, outside

When we match traffic with PBR only one link forward traffic.

[cofee]

Hi Larbi,

Please go through this discussion and it may help you resolving the issue you are having. PBR configuration is towards the bottom of thread.

https://supportforums.cisco.com/discussion/13167586/problem-accessing-internet-through-asa-5540

If this post doesn't help then please share your PBR configuration and route table.