Dual ISP on single FDM

[Jdogg1985]

Hello,

My setup is a Cisco Firepower 1120 FTD version 7.6.2.1-3  (FDM). We have 2 ISP outside interfaces. For this we'll name them ISP-A and ISP-B. So currently we have our default internet traffic as well as VPN going through ISP-A. We want to make it where default internet traffic goes through ISP-B and VPN traffic goes through ISP-A. I know PBR is something that doesn't usually work on FDM, but is FlexConfig or SmartCLI an option. 

[Rob Ingram]

@Jdogg1985 as per the FDM 7.7 guide it states PBR is supported using FlexConfig https://www.cisco.com/c/en/us/td/docs/security/firepower/770/fdm/fptd-fdm-config-guide-770/fptd-fdm-routing.html

Aside from that, you could just create static routes via ISP-A for the VPN networks and the default route via ISP-B.

[Jdogg1985]

Thank you for this. I'm not able to get to the office this week but will try next week and update this thread.