Firepower 1120 SSD replacement procedure.

[dariom]

Hello,

My Cisco FirePower 1120, does not boot due to SSD disk failure and at this point I need to replace it with a new one and I am wondering to know, how can I Perform a Complete Reimage of the new SSD disk.

The ROMMON version installed is 1.0.25 and the software previously installed was Version 7.6.0 (Build 113)

Thanks.

[Rob Ingram · Accepted solution]

@dariom download the 7.6 software image cisco-ftd-fp1k.7.6.0-113.SPA from - https://software.cisco.com/download/home/286322198/type/286306337/release/7.6.0

And then reimage using the following guide - https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/reimage/asa-ftd-reimage.html

[dariom · Accepted solution]

Hello Rob,

I wish to thank you for the useful information, thank to linked document, finally I was able to recover the Firepower image onboard of a new SSD disk and now everything is OK.

Dario