cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1488
Views
0
Helpful
2
Replies
dcountryman68
Enthusiast

Firepower Threat Defense - NAT and ACL import Issue

I was able to create an import to bring into the Firepower Threat Defense from an ASA 9.1.  When I try to Deploy the changes to the FTDs, I get could not deploy ebcause of configuration issues.  Where can I find out what these configuration issues are?

An additional issue that I am having is I can not SSH to the FTD, I can get to the CLI of the 4110, but the FTD, will not take the admin user and password.  Any idea on how I can reset this so that I may get to the cli?


Thank you in advance for your assistance.

FTD Version 6.1, FMC Version 6.1, 4110 Version 2.0(1.68)

1 ACCEPTED SOLUTION

Accepted Solutions
yogdhanu
Cisco Employee

Hi

Policy deployment failure reason can be found from the FMC logs or FTD logs from CLI side.

It will be in action_queue.log

For FTD cli, you need to SSH to FTD management IP and not 4110 IP

If you are connected to FTD CLI and just need to reset the password, please follow these procedures.

To reset password for the FTD.
1) Login to the FXOS
2) click on Logical device.
3)Edit the Security module(pencil icon on the right side of the module name)
4)Click on the FTD (big box in the middle)
5)Configuration tab will be opened > Click on setting> there is an option to change password on that
6) save the configuration.

Rate if helps.

Yogesh

View solution in original post

2 REPLIES 2
yogdhanu
Cisco Employee

Hi

Policy deployment failure reason can be found from the FMC logs or FTD logs from CLI side.

It will be in action_queue.log

For FTD cli, you need to SSH to FTD management IP and not 4110 IP

If you are connected to FTD CLI and just need to reset the password, please follow these procedures.

To reset password for the FTD.
1) Login to the FXOS
2) click on Logical device.
3)Edit the Security module(pencil icon on the right side of the module name)
4)Click on the FTD (big box in the middle)
5)Configuration tab will be opened > Click on setting> there is an option to change password on that
6) save the configuration.

Rate if helps.

Yogesh

View solution in original post

dcountryman68
Enthusiast

This worked perfectly.  Thank you very much for your assistance,

Content for Community-Ad