11-08-2019 12:27 PM - edited 02-21-2020 09:40 AM
Hi,
New out of the box FMC 1600 running 6.3.0 (build 83). Installing patch 6.3.0.4 failed with the message:
Installing Cisco Firepower Mgmt Center Patch version: 6.3.0.4-44 (Local Install) failed at Sat Nov 9 07:16:12 2019
Update Installation Failed : [ 8%] Fatal error: Error running script 000_start/112_CF_check.sh. For more details see /var/log/sf/Cisco_Firepower_Mgmt_Center_Patch-6.3.0.4/000_start/112_CF_check.sh.log on the device being upgraded.
The log file says
root@FMC1:/var/log/sf/Cisco_Firepower_Mgmt_Center_Upgrade-6.4.0/000_start# cat 112_CF_check.sh.log
**********************************************************
[191108 19:46:49:152] Starting script: 000_start/112_CF_check.sh
Entering 000_start/112_CF_check.sh...
flash device identified:
Checking functionality of flash device.
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
Flash device missing.
Exiting 000_start/112_CF_check.sh.
The above patch install was attempted after getting the very same failure message on upgrading from 6.3.0 to 6.4.0.
Any ideas?
Regards,
Rick.
Solved! Go to Solution.
11-08-2019 07:34 PM
I'd recommend opening a TAC case - the issue could be hardware related as it appears to be hanging up on checking the CF (Compact Flash) internal storage device.
11-08-2019 07:34 PM
I'd recommend opening a TAC case - the issue could be hardware related as it appears to be hanging up on checking the CF (Compact Flash) internal storage device.
11-26-2019 04:34 PM
Thanks Marvin,
Opened a tac case and the unit has been RMA'ed.
Regards,
Rick.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: