ACP rule search is very limited as far I know, on the right corner, we can filter by device, and there is search field on the right corner, where you can search to match the input field (IP address, rule name , protocol, ports etc) . One cannot search whether particular flow is already allowed in the ACP or not. There is no filter view like that of CSM.
Hi Guys, I have RA AnyConnect VPN configured for users on FTD via FMC (Both FMC and FTD are version 6.6). AnyConnect has been running fine. I have multiple Connection Profiles for RA AnyConnect, each Connection Profile has about 50-100 us...
Cisco ISE Secure Wired Access Prescriptive Deployment Guide
Authors: Hariprasad Holla (until June 2018), Mahesh Nagireddy (until Dec 2018)
For an offline or printed copy of this document, simply choose ⋮ Options > Printer ...
Meet the Authors Slides- SecureX and the Evolution of Security Orchestration Automation and Response
(Live event – Wednesday, 20th, 2021 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 6:00 p.m. Paris)
This event had place on Wednesday 20th, January 202...
The following guide goes over the in and out of the Cisco Endpoints Security Analytics Dashboard as an overview and faq page
For more information on the solution please visit the CESA POV page
Building content as of 1/19/2021
Most of the informati...
Join us live on Tuesday, January 19 at 10:00 am PT (and on demand after) as we discuss the latest version of ATT&CK and the expansion of TTPs in v8.
As a security expert, you are tasked with protecting your environment. You see the value of...