FMT 7.7.10.3 - Blocked OSPF OSPF Configuration already exists

[Agung1007]

Hi Team,

kindly need you info regarding this Error that showed up after Optimize ACL, Object , etc

BLOCKED :

OSPF Configuration already exists on the FMC. Please disable OSPF on the FMC before proceeding with the Migration

what causing this issue ?

due Fresh Intsall for FMCv and no FTD Device Managed.

Already Copy the FMT file in new Folder, twice but the alert Error still Showed Up.

Notes :

- FMT Running 7.7.10.3

- FMCv Fresh Installed

- FMCv running 7.6.2

- No Managed Device

- backup config using ASA-Mode only (by Show Tech)

[Ben Weber]

If you haven't already, I would have a look through this similar post and try some of the suggestions in there: FMT issue OSPF enabled error where there is no ospf config - Cisco Community. Ensuring that you don't have OSPF enabled for any of the devices you are migrating is a good start.

Otherwise, you should collect the troubleshooting bundle and see if the application is picking up OSPF routes in your current configuration. TAC should be able to help you with this.

Good luck!