FPR-2140 FTD rebooted, Console yes, Firewall no

ida71 · ‎11-30-2022

I had an issue & failed over to the standby, then rebooted the Primary (now the standby unit).

The management IP responds to ping, but I can't SSH to it. I had a physical reboot performed, same result. I have had a console added & startup is normal, I can login to the console, but any command that requires interaction with FXOS/FTd comes back as

"Error: Timed out communicating with DME"

Case is open with Cisco, but they are taking their own sweet time to get back to me. Anyone have any experienced advice ?

Thanks

marce1000 · ‎11-30-2022

- Check if these could be relevant : https://bst.cloudapps.cisco.com/bugsearch?pf=prdNm&kw=Timed%20out%20communicating%20with%20DME&bt=custV&sb=anfr&prdNam=Cisco%20Firepower%202100%20Series

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

ida71 · ‎11-30-2022

Thanks for the pointer, unfortunately show pmon state does not return anything !?

ida71 · ‎12-02-2022

So No magic from TAC, box failed to load correctly for whatever reason. So reimaged & will bring it back into HA.