01-19-2021 07:08 AM
Hello,
I would like to ask about the management addresses of Firepower 2120
It has one IP for the chassis management and one IP for the ASA management. By default they are in the same subnet.
Is it necessary to be in the same subnet?
How do I change the chassis management IP?
Thanks and regards,
Konstantinos
Solved! Go to Solution.
01-19-2021 12:23 PM
As long as routing from the management IP to the network you are managing the device from is in place, there really is no need for the IPs to be on the same subnet.
To change the IP of FXOS refer to the following guide:
01-19-2021 08:27 AM
Technically not necessary should be same, as long you have mapped VLAN correctly with the interfaces attached to devices.
01-19-2021 12:23 PM
As long as routing from the management IP to the network you are managing the device from is in place, there really is no need for the IPs to be on the same subnet.
To change the IP of FXOS refer to the following guide:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide