cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

FTD routing

Mustapha Bassim
Beginner
Beginner

Hello Dears

 

I had evaluation licensee for FTD physical box 2100 I am managing it through FDM not FMC, and I had enable the routing (static route) but still can not ping from inside users to any of external hosts and when try to ping I got   general failure transmit fail  anyone can help me plz?

 

Bests

1 ACCEPTED SOLUTION

Accepted Solutions

balaji.bandi
VIP Guru VIP Guru
VIP Guru

what is the config on FTD, do you have NAT in place :

 

Do basic setup :  ( try from FTD ping outside before you ping from users)

 

https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-mgmt.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

3 REPLIES 3

Kasun Bandara
VIP Advocate VIP Advocate
VIP Advocate

normally general failure is getting when client device not connected to network properly. check your connectivity of PC/Mobile to network.

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

hello dear

 

Thanx for fast replying , the user had ping the gateway without any issue but got the mentioned error in case of pinging any ip routed through the device

balaji.bandi
VIP Guru VIP Guru
VIP Guru

what is the config on FTD, do you have NAT in place :

 

Do basic setup :  ( try from FTD ping outside before you ping from users)

 

https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-mgmt.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: