01-03-2010 04:27 PM - edited 03-11-2019 09:53 AM
Is it possible to use a secondary IP Address on the FWSM.
Customer wishes to migrate VLAN 1 behind the FWSM.
interface Vlan1
description "LEGACY VLANS"
ip address 192.168.2.1 255.255.255.0 secondary
ip address 192.168.1.1 255.255.255.0
Thanks,
Colm
Solved! Go to Solution.
01-04-2010 10:06 AM
The FWSM does not have a secondary ip address.
You can hack it to proxy for that ip by doing
static(interface_name,interface_name) 192.168.2.1 192.168.2.1
But that would just make the FWSM to proxy arp for that ip and receive the packets.
If your goal is for these packets to be destined to the FWSM itself for management it won't work.
If it is for through traffic it could make it work.
I hope it helps.
PK
01-04-2010 10:06 AM
The FWSM does not have a secondary ip address.
You can hack it to proxy for that ip by doing
static(interface_name,interface_name) 192.168.2.1 192.168.2.1
But that would just make the FWSM to proxy arp for that ip and receive the packets.
If your goal is for these packets to be destined to the FWSM itself for management it won't work.
If it is for through traffic it could make it work.
I hope it helps.
PK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide