Hello,
As you can see in the title, I have to migrate a (huge) configuration from FWSM OS v4.1 to ASA OS v9.6.1 on Firepower 4100.
I found the FWSM to ASA-SM migration tool - which translates the configuration to ASA-SM OS v8.5 - here:
http://www.cisco.com/c/en/us/td/docs/security/asa/migration/fwsm/fwsm2asasm.html
I also know the officially recommended upgrade path from here:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa96/release/notes/asarn96.html#ID-2152-0000000a
There are two problems:
1. I can't boot in place with one of the new ASA images, because I am migrating *both hardware & software version* at the same time.
2. I can't figure out where the resulting ASA-SM v8.5 configuration from the first link would fit in the table from the second one.
Supposing I can find and will use an old ASA 5550, I still can't figure out with which software version I would have to start the migration with.
Version 8.5 seems to be an odd one, I can't find it here:
https://software.cisco.com/portal/pub/download/portal/select.html?&mdfid=280563817&flowid=4376&softwareid=280775065
Has anyone successfully done this, and if yes, how did you go about it ?
Thank you !
--