07-15-2011 07:26 AM - edited 03-11-2019 01:59 PM
I know with a ASA5510-SEC-BUN-K9, you can increase eth0/0 and eth0/1 to gigabit with the right IOS. Is the same possible with the CSC version of the ASA?
Exact pn is ASA5510-CSC10-K9. I believe I only have the base license for the ASA, but the security plus for the CSC.
Solved! Go to Solution.
07-15-2011 07:39 AM
Here is the license sheet for reference:
http://www.cisco.com/en/US/customer/docs/security/asa/asa82/license/license82.html#wp191352
Hope this helps,
Varun
07-15-2011 07:31 AM
Hi Ben,
You can definitely do that , there is no difference in the ASA , its just that it comes with an additional CSC module.
Varun
07-15-2011 07:35 AM
Thanks for the reply but when I go issue the 'speed 1000' command cli says it's invalid.
07-15-2011 07:38 AM
You need to have the rigt license for it.
Varun
07-15-2011 07:39 AM
Here is the license sheet for reference:
http://www.cisco.com/en/US/customer/docs/security/asa/asa82/license/license82.html#wp191352
Hope this helps,
Varun
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: