Hi,
My Customer orders the following SKUs in one to make these ASA with FirePOWER Services as H/A.
Line
Number | Item Name | Description | Service
Duration | Lead
Time | Included
Item | Quantity | ListPrice | Extended
ListPrice | Discount
% | Selling
Price |
| | | | | | | | | | |
1.0 | ASA5515-FPWR-K9 | ASA 5515-X with FirePOWER Services 6GE AC 3DES/AES SSD | N/A | 14 days | No | 2 | | | | |
| | | | | | | |
2.0 | L-ASA5515-TAMC= | Cisco ASA5515 FirePOWER IPS AMP and URL Licenses | N/A | 0 days | No | 2 | | | | |
2.0.1 | L-ASA5515-TAMC-1Y | Cisco ASA5515 FirePOWER IPS AMP and URL 1YR Subs | 12 month(s) | N/A | No | 2 | | | | |
| | | | | | | |
| | | | | | | | |
| | | | | | | | | | | | | | | |
Assuming from my experiences, 2 PAKs are supposed to be issued.
PAK_A : 1 PAK for ASA5515-CTRL-LIC (Entitlement Qty:2)
PAK_B: 1 PAK for L-ASA5555-TAMC= (Entitlement Qts:2)
Also these FireSIGHTs which monitors these ASAs are H/A.
The SKUs of FireSIGHTs are following:
-FS1500-K9
-FS1500-BASE-K9
In this case, I assume that these steps are necessary for generating licenses for ASA with FirePOWER Servies;
Go to license page ( www.cisco.com/go/license) and input PAK_A. Then following the steps and on “Add Device”section, should I input the following 3 devices license keys ?
-Another ASA5515-FPWR-K9
-FS1500-K9
-FS1500-BASE-K9
And then 2 licenses which are one is for FS1500-K9 and the other is for FS1500-BASE-k9 are to be generated.
*I have to do that same operation for PAK_B.
Q1: Is this right? Do I understand the steps correctly ?
Q2 :If the answer for Q1 is Yes, does it mean that any license is not required for ASA with FirePOWER services ?
