Hi,
I bought a used 5515-X from a company and it was suppose to have FTD on the flash and not ASA. See below
Result of the command: "sho ver"
Cisco Adaptive Security Appliance Software Version 9.10(1)
Firepower Extensible Operating System Version 2.4(1.103)
Device Manager Version 7.1(5)100
Compiled on Wed 24-Oct-18 16:31 PDT by builders
System image file is "disk0:/asa9101-smp-k8.bin"
Config file at boot was "startup-config"
NGFW up 1 year 3 days
Hardware: ASA5515, 8192 MB RAM, CPU Clarkdale 3059 MHz, 1 CPU (4 cores)
ASA: 4096 MB RAM, 1 CPU (1 core)
Internal ATA Compact Flash, 8192MB
BIOS Flash MX25L6445E @ 0xffbb0000, 8192KB
Encryption hardware device : Cisco ASA Crypto on-board accelerator (revision 0x1)
Boot microcode : CNPx-MC-BOOT-2.00
SSL/IKE microcode : CNPx-MC-SSL-SB-PLUS-0005
IPSec microcode : CNPx-MC-IPSEC-MAIN-0026
Number of accelerators: 1
Baseboard Management Controller (revision 0x1) Firmware Version: 2.4
0: Int: Internal-Data0/0 : address is e4d3.f1d0.431e, irq 11
1: Ext: GigabitEthernet0/0 : address is e4d3.f1d0.4322, irq 10
2: Ext: GigabitEthernet0/1 : address is e4d3.f1d0.431f, irq 10
3: Ext: GigabitEthernet0/2 : address is e4d3.f1d0.4323, irq 5
4: Ext: GigabitEthernet0/3 : address is e4d3.f1d0.4320, irq 5
5: Ext: GigabitEthernet0/4 : address is e4d3.f1d0.4324, irq 10
6: Ext: GigabitEthernet0/5 : address is e4d3.f1d0.4321, irq 10
7: Int: Internal-Data0/1 : address is 0000.0001.0002, irq 0
8: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 0
9: Int: Internal-Data0/2 : address is 0000.0001.0003, irq 0
10: Ext: Management0/0 : address is e4d3.f1d0.431e, irq 0
11: Int: Internal-Data0/3 : address is 0000.0100.0001, irq 0
12: Int: Internal-Data0/4 : address is 0000.0200.0001, irq 0
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Enabled perpetual
Security Contexts : 5 perpetual
Carrier : Enabled perpetual
AnyConnect Premium Peers : 250 perpetual
AnyConnect Essentials : 250 perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
AnyConnect for Mobile : Enabled perpetual
AnyConnect for Cisco VPN Phone : Enabled perpetual
Advanced Endpoint Assessment : Enabled perpetual
Shared License : Disabled perpetual
Total TLS Proxy Sessions : 500 perpetual
Botnet Traffic Filter : Enabled perpetual
IPS Module : Enabled perpetual
Cluster : Enabled perpetual
Cluster Members : 4 perpetual
This platform has an ASA 5515 Security Plus license.
Serial Number: HIDDEN
Running Permanent Activation Key: HIDDEN
Configuration register is 0x1
Image type : Release
Key version : A
Configuration last modified by jcart at 17:08:54.902 UTC Thu Jul 8 2021
I have FMC installed on a VM but need to know how to buy the IOS. I have contacted a cisco vendor but they have not been much help.
Thanks,
WW
