how to connect to other clients on remote VPN (ASA)

mohitvicky · ‎02-02-2014

I have a cisco ASA 5510 device. I have confiured remote access VPN on it.

It works fine, i can connect to hosts on INSIDE as well as DMZ, but i cannot connect to other clients that are connected to same VPN.

For example i have to clients connected to VPN clientA and clientB with vpn pool IP addresses 10.40.170.160 and 10.40.170.161 respectively.

these both devices are not able to connect each other.

Any suggestions.

Thanks in advance.

mohitvicky · ‎02-03-2014

solved, thanks to Jouni

configured following:

access-list VPN-CLIENT-NAT0 remark NAT0 for traffic between VPN Clients

access-list VPN-CLIENT-NAT0 permit ip 10.40.170.0 255.255.255.0 10.40.170.0 255.255.255.0

nat (outside) 0 access-list VPN-CLIENT-NAT0

you can see detailed discussion here :