cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

718
Views
0
Helpful
3
Replies
Highlighted

How to fix my ASA 5505

Im trying to know left the ROMmon mode, but I dont know whats wrong with my ASA 5505 mode router. I have right know this configuration.
 rommon #0> set
ROMMON Variable Settings:
  ADDRESS=10.0.0.2
  SERVER=10.0.0.1
  GATEWAY=10.0.0.1
  PORT=Ethernet0/1
  VLAN=untagged
 IMAGE=asa841-k8.bin
  CONFIG=
  LINKTIMEOUT=20
  PKTTIMEOUT=4
  RETRY=20
I don't know is (image=) correct for my current version of ASA 5505. Please, I need to fix this. What can I do? Where can I download the correct version of (image=) for my ASA 5505? 

3 REPLIES 3
Highlighted
VIP Advisor

HI @DionlysDelgado3945 ,

 

Does your device have an iOS already?

Can you rule out the issue of the registry?

https://learningnetwork.cisco.com/thread/66498

rommon #0>confreg

rommon #1>confreg 0×01

rommon #2>boot

 

Regards

Highlighted

Thank you, @luis_cordova 

I still continue the same problem, I did the commands but nothing change, I continued on the  rommon mode. I think that my problem is with the flash (IMAGE=asa841-k8.bin), maybe not correspond with my ASA 5505 version. Do you know how to download the new one?

Highlighted

Hi @DionlysDelgado3945 ,

 

That iOS is valid for your device, but it's old:CA6CF668-0F71-4EBD-9A59-06F9352AA3EF.jpeg

The recommended IOS is:F865B128-3833-4D94-8982-B348619F3E5E.jpeg

 

To download an IOS it is necessary to have a valid support contract.

 

Regards

 

Content for Community-Ad