Hi ,
Iam facing problem in configuring IPS SSM in ASA 5520
1)Its not taking the ip on virtual sensing interface.
2)iam not able to ping the management ip address although the gateway is pingable.
this is the show config of SSM Module.
! ------------------------------
Do i need to upgrade it to 6.0(1)-E1
! Version 5.1(6)
! Current configuration last modified Tue May 2
! ------------------------------
service interface
physical-interfaces GigabitEthernet0/1
description "SSM Interface"
exit
exit
! ------------------------------
service analysis-engine
virtual-sensor vs0
physical-interface GigabitEthernet0/1
exit
exit
! ------------------------------
service authentication
exit
! ------------------------------
service event-action-rules rules0
exit
! ------------------------------
service host
network-settings
host-ip 192.168.1.1/24,192.168.1.2
host-name iyogi_SSM
telnet-option disabled
exit
time-zone-settings
offset 0
standard-time-zone-name UTC
exit
summertime-option disabled
exit
! ------------------------------
service logger
exit
! ------------------------------
service network-access
exit
! ------------------------------
service notification
exit
! ------------------------------
service signature-definition sig0
exit
! ------------------------------
service ssh-known-hosts
exit
! ------------------------------
service trusted-certificates
exit
! ------------------------------
service web-server
port 443
exit
Regards,
