cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
969
Views
10
Helpful
7
Replies

IPS and the March 2007 Time Change

dfiorefms
Level 1
Level 1

Hello -

How will the 4200 series running

IPS 5.1-X handle the March 2007 Time Change?

Daylight Savings time is starting early this year and I need to know if the current time settings will auto-adjust come March.

Thank you

7 Replies 7

wsulym
Cisco Employee
Cisco Employee

5.1(4) has the changes to accomodate the DST changes.

So 5.1(4) or better and you're all set.

Thank you Walter -

One more question: Will there be any updates to the 5.1(4) package? 5.1(5)? Or should I go ahead and install the 5.1(4) dated 10-Nov-06?

Do you know how to go about actually making the change? I am running 5.1.(4)

Hi I have tested this with the following config. (for EST/EDT in my example). I was running 5.1(4) in 4250 sensor.

summertime-option recurring

offset 60

summertime-zone-name EDT

exit

I set the clock to March 11th 2007 01:55 and when it hit 02:00 it automatically changed to 03:00.

Easiest way to do this is by running 'setup' macro.

Edward

No chgs to make if you have already accepted the summertime defaults. Using CLI I will show the difference in the host cfg defaults between 5.1.3 and 5.1.4:

5.1(3):

sensor# conf t

sensor(config)# ser host

sensor(config-hos)# show set | begin summer

summertime-option

-----------------------------------------------

recurring

-----------------------------------------------

offset: 60 minutes

summertime-zone-name: CDT

start-summertime

-----------------------------------------------

month: april

week-of-month: first

day-of-week: sunday

time-of-day: 02:00:00

-----------------------------------------------

end-summertime

-----------------------------------------------

month: october

week-of-month: last

day-of-week: sunday

time-of-day: 02:00:00

-----------------------------------------------

5.1(4):

sensor# conf t

sensor(config)# ser host

sensor(config-hos)# show settings | begin summer

summertime-option

-----------------------------------------------

recurring

-----------------------------------------------

offset: 60 minutes

summertime-zone-name: CDT

start-summertime

-----------------------------------------------

month: march

week-of-month: second

day-of-week: sunday

time-of-day: 02:00:00

-----------------------------------------------

end-summertime

-----------------------------------------------

month: november

week-of-month: first

day-of-week: sunday

time-of-day: 02:00:00

-----------------------------------------------

5.1(4) will become the minimum required OS version as of February 15, 2007 - you won't be able to apply signature updates beyond that without 5.1.4 installed. I do not believe that 5.1.5 will be out before that.

gdntsoc
Level 1
Level 1

Greetings all. Just wanted to confirm again based on this thread. We have numberous 42xx IDP sensors running 5.1(4) with the latest sig pack. They're all configured to run UTC/GMT. Here's a snippet from their configs,

time-zone-settings

offset 0

standard-time-zone-name UTC

There are no changes required in anticipation of the DST change, correct?

Review Cisco Networking for a $25 gift card