IPS Module clock shows 05/2003 and its grayed out

[Arsen Gharibyan]

Hello Everyone.

I just got IPS module replaced (waranty) on asa 5520 i wasnt able to do notyhbng with it unless i changed my time on a laptop and put it to 05/2003

then i was able to update os and acces it thru ASDM/IDM.The command "set clock" is missing and i cant change the time on the module.

But now i can access IPS with proper time on my laptop.

Question1: How can i change the time ?

Question2: Will the IPS operates properly if i leave the time set to 05/2003 ?

Question3:why i cant ping from IPS ?

IPS SSM10

os 7.1(7)e4

[Julio Carvajal]

Hello Arsen,

The comamnd is clock set,

Please read the following document for the understanding of how the IPS clock works.

http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/cli/cli_setup.html#wp1096156

Make sure  you allow the IP address you are trying to ping from on the sensor IPS.

For more information about Core and Security Networking follow my website at http://laguiadelnetworking.

Any question contact me at jcarvaja@laguiadelnetworking.com

Cheers,

Julio Carvajal Segura

[Arsen Gharibyan]

thanks for reply, but acctually there is no commnand clock set or set clock

[Arsen Gharibyan]

even From IME its greyed out

[Julio Carvajal]

Did you check the link? Try it from CLI.

note: in order to use IME is a requirement to have the same time on both the IPS and the computer where the IME application is installed.

For more information about Core and Security Networking follow my website at http://laguiadelnetworking.

Any question contact me at jcarvaja@laguiadelnetworking.com

Cheers,

Julio Carvajal Segura

[Arsen Gharibyan]

yes i did.

btw that what cisco says for ips, but in the real world its working i will attach some pics on monday

[Julio Carvajal · Accepted solution]

Sure,

Bring them

For more information about Core and Security Networking follow my website at http://laguiadelnetworking.

Any question contact me at jcarvaja@laguiadelnetworking.com

Cheers,

Julio Carvajal Segura

[Arsen Gharibyan]

Thank you JCarvaja for your time

The Issue resolved.

Im also attaching some pics just FYI

[Arsen Gharibyan]

To resolve this i had to manually enter NTP Server IP and it autoamatically updated the time on the Sensor

[Julio Carvajal]

Hello Arsen,

Glad to hear that my friend,

Please mark the question as answered so future users can learn from this

For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com

Any question contact me at jcarvaja@laguiadelnetworking.com

Cheers,

Julio Carvajal Segura