ISA-3000-4C-FTD Setup guide

[sv7]

Hi All,

Our organisation brought 2 ISA-3000-4C-FTD to install in our network. I have not worked before on such product can anyone help me on my below query

1) Can we configure this device same like we do for normal Cisco FDM/FTD devices. if not are anyone have configuration guide for it ?

2) Can we manage this devices using FDM ?

3) What else precautions or points to be remembered while installing/configuring this device in network.

[balaji.bandi]

follow below step :

https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/isa3000/isa-3000-gsg/m_introduction.html

[sv7]

Hi ,

Thanks for sharing the configuration guide. As per document it states gig1/1 and 1/2 and gig1/3 and 1/4 are in hardware bridge pairs. What does it means ? Also cant i remove them from bvi to configure a L3 interface for routing and all function. 

[balaji.bandi]

That is if you deploying transparent mode, if you deploying router mode refer below diagram next to that.