cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
206
Views
4
Helpful
5
Replies

L2TP on FTD 1150

KayaaKashyap
Level 1
Level 1

Hi,

we have one requirement to configure L2TP between two FTDs (managed by FMC) in different geographical locations.

Please help me with steps and prerequisite.

 

 

1 Accepted Solution

Accepted Solutions

Sdwan provide IP reachability which use for bgp evpn to extend vlan from site to site.

MHM

View solution in original post

5 Replies 5

https://www.cisco.com/c/en/us/support/docs/security/secure-firewall-management-center/221043-configure-vxlan-interfaces-on-secure-ftd.html

No more l2tp support in ftd you can use vxlan check guide I share 

Note:- if you have issue with VNI please mention that

Thanks 

MHM

Hi, Thanks for your time and reply. 

it is bit confusing for me. I have one silly query. 

Let’s assume we have two sites which are connected via SDWAN.

We want to configure vlan on site one and extend the same vlan to site 2.

How both site will communicate over public network? Do we need NAT in this case? 

Thank you in advance.

@KayaaKashyap no NAT is not going to extend the VLAN. You could use VXLAN to extend Layer 2 VLAN over the VPN.

Sdwan provide IP reachability which use for bgp evpn to extend vlan from site to site.

MHM

Review Cisco Networking for a $25 gift card