08-08-2012 09:00 AM - edited 03-11-2019 04:39 PM
Hi,
We need to have one connection with less internet bandwidth assigned to it than all other other connections. Basically it is a separate conection from all others, incomming just from one switch port and separate VLAN
I know this can be done on the switch by limiting the bandwidth allocated to a port,
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# srr-queue bandwidth limit 80
however, is it possible to have the speed limited down, just before it goes to the internet, ie, on the ASA, rather than doing it on the switch?
The firewall is an ASA 5505
Thank you in advance
08-12-2012 07:42 PM
Hello,
You can use Policing QoS.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml
Version is a bit old, but it still applies.
Mike
08-12-2012 10:39 PM
Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide