with acs 4.2 installed in my network, PEAP, EAP-TLS, md5... authentications work normally. But Mac-Based-Authentication doesnt work at all. i tested every thing but no luck .
This is what i have setup on Swith for MAB:
aaa new-model
aaa authentication login default none
aaa authentication dot1x default group radius
radius-server host 192.168.2.16 auth-port 1645 acct-port 1646 key cisco
!
dot1x system-auth-control
!
interface FastEthernet0/1
switchport mode access
dot1x pae authenticator
dot1x port-control auto
dot1x mac-auth-bypass
On ACS server, i created Netword-Profile for MAB, i added those Agentless hosts mac-adds, Even i created User-Name&password by those Agentless hosts mac-adds on acs, ..... still nothing seems to be working. i have selected ACS_Internal-Database for mac authentication.
On ACS while i check the Failed-attempt log, nothing is logged there. i dont know where is the issue.
Please tell me where im wrong on my config?