Multiple NAT translation for Same IP

[Hari Vishnu]

Is it possible to have multiple NAT translation for same IP

We have a NAT statement as follows.

10.0.0.1 -- > 100.10.10.10

10.0.0.0/24 - 10.0.0.0/24 - Identity NAT for the traffic between same ranges. But this is not using when we have the first nat rule (NAT TO A PUBLIC IP) is  in place.

[Jouni Forss]

Hi,

There should be no problem with translating one IP address to many BUT this usually means somekind of Policy NAT when we are trying to translate one IP address to many different ones on a single destination interface.

Can you give a brief description of the whole setup you want to achieve?

Also we need to know your firewalls software level.

- Jouni