Nexus 9000v licensing

[ciscoworlds]

Hi all;

Does Nexus 9000v need special license to be installed for full functionality in the lab environment?

I installed 3 of them with basic BGP and basic OSPF works but I got messages while enabling PIM feauture stating that I need to install license! Besides, I've connected one CSR 1000v router to a L2 port on one Nexus 9000v switch but I cannot see its MAC address on Nexus device (ports are enabled and in Access mode). But two mentioned devices see each other in CDP neighbor table. Is it something related to license or what? 

n9k-1(config-if)# sh cdp neigh
csr-1 Eth1/3 155 R I CSR1000V Gig6
!
!
n9k-1(config-if)# sh mac address inter eth1/3
VLAN MAC Address Type age Secure NTFY Ports
---------+-----------------+--------+---------+------+----+------------------

n9k-1(config-if)# 
!
!
n9k-1(config-if)# sh run inter e1/3

interface Ethernet1/3
switchport access vlan 2
spanning-tree port type edge 

[Istvan kelemen]

Hello,

In order to see the MAC address table please use "show system internal l2fwder mac".

Which version are you using? The latest version runs PIM without license. Please make sure "feature pim" is enabled in global config.

NXv1# sh ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2019, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Nexus 9000v is a demo version of the Nexus Operating System

Software
BIOS: version
NXOS: version 9.2(4)
BIOS compile time:
NXOS image file is: bootflash:///nxos.9.2.4.bin
NXOS compile time: 8/20/2019 7:00:00 [08/20/2019 15:52:22]

Hardware
cisco Nexus9000 9000v Chassis
Intel(R) Xeon(R) CPU E7- 4870 @ 2.40GHz with 8133468 kB of memory.
Processor Board ID 90K91WCLXQJ

Device name: NXv1
bootflash: 3509454 kB
Kernel uptime is 3 day(s), 2 hour(s), 32 minute(s), 59 second(s)

Last reset
Reason: Unknown
System version:
Service:

plugin
Core Plugin, Ethernet Plugin

Active Package(s):

NXv1# sh ip pim ne
PIM Neighbor Status for VRF "default"
Neighbor Interface Uptime Expires DR Bidir- BFD ECMP Redirect
Priority Capable State Capable
10.0.0.2 Ethernet1/2.10 2d10h 00:01:37 1 yes n/a no
10.0.15.2 Ethernet1/2.15 2d23h 00:01:27 1 yes n/a no