NTP problem FMC

[Hacen.bani]

hi all

i have problem in my fmc cisco virtual

i configured the fmc to take the time from NTP server in my AD server and i allowed the port 123/UDP to this server 

but the FMC always use the own time 127.127.1.1

remote refid st t when poll reach delay offset jitter
==============================================================================
srv-dcp.steg-is 51.140.127.197 3 u 50 64 377 0.403 -7.631 2.320
*LOCAL(1) .SFCL. 12 l 18 64 377 0.000 0.000 0.000

root@STEGfirepower:/Volume/home/admin# ntpq -pn
remote refid st t when poll reach delay offset jitter
==============================================================================
192.168.1.201 51.140.127.197 3 u 46 64 377 0.427 -11.760 1.892
*127.127.1.1 .SFCL. 12 l 42 64 377 0.000 0.000 0.000
root@STEGfirepower:/Volume/home/admin#

please how can i change my ntp server to primary in FMC

thanks team

[Marvin Rhoads]

Did you restart the ntp daemon after making the changes?

[Hacen.bani]

thanks, Marvin for your reply

no, I don't restart it

How can I restatrt the ntp daemon please ?

[Marvin Rhoads]

You can restart it using the command:

sudo pmtool restartbyid ntpd

That and more details on troubleshooting NTP on FMC can be found here:

https://www.cisco.com/c/en/us/support/docs/security/firesight-management-center/118626-technote-firesight-00.html