11-23-2002 02:29 PM - edited 02-20-2020 10:23 PM
Hi All,
Could you tell me how to configure PIX 501 to make vioce and video conversation via MSN Messenger and Netmeeting?
Thanks in advance
11-24-2002 03:40 PM
First off, upgrade to 6.2(2), there's a lot of issues with H323 and earlier code versions. Even then though, it still may not work, since the PIX doesn't support PAT and H323 versions 3 and 4 until 6.3 code. It should work if you can assign a static one-to-one address translation for the inside PC that you're using, but if you only have one IP address, then there's not a whole lot you can do if it doesn't work after upgrading.
You can also try turning off the H323 fixup's within the PIX, sometimes they cause more harm than good.
12-03-2002 05:01 PM
I have the same problem with the MSN messenger. I have 6.1(2) version of the PIX firewall. If I can turn off the H323 fixup and ill have a static one to one translation plus allowing access-list to that public address, can this really make me use of the voice and video? Currently i can only use the messaging feature of the messenger using port 1863. What ports do I need to open for the voice and video? Maybe you can post a sample config. Tnx in advance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide