Pix 515E SSH w/ 3DES Error

[luke.redd]

I have a Pix 515E with an Unrestricted license and I have completed the basic commands to enable SSH support.

However, when I try to connect (with SecureCRT) to the firewall, I receive the error "The server does not support cipher 3DES. The server supports the following ciphers: DES"

If I change SecureCRT to DES it works just fine.

Am I just missing something here? I have a 501 with a Restricted license, same PixOS and exact same conf (as far as ssh is concerned) and it is working just fine with 3DES.

If anyone could shed some light on this I would be extremely grateful.

--Luke

NOTES:

Pix 515E

Pix OS 6.3(4)

Unrestricted License

[scottmac]

You may just need to download the hash key to enable 3DES.

When you do a SH VER, it should give you a capability list at the bottom. For Example:

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES-AES: Enabled

Maximum Interfaces: 2

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: 10

Throughput: Unlimited

IKE peers: 10

This PIX has a Restricted (R) license.

If you register your PIX (re-register your PIX?) Cisco will email you hash to unlock the 3DES capability.

Check it out.

Good Luck

Scott

[luke.redd]

Soctt,

Thank you for that! I completely forogt about registering to obtain a 3DES key, I guess I thought a UR license would include it.

Thanks,

Luke