Pix 6.2 to 8.04

[ronald.ramzy]

Hi,

Can I paste the pix with software 6.2 configuration directly to Pix with software 8.0...

Pix with 6.2 had Remote-Acess and Site-to-site VPN ; is there a way to recover password and keys configured on the Pix so that I could keep as reference.

Thanks

[eddie.mitchell]

Depends. I would read the following document for some guidance:

http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html

https://supportwiki.cisco.com/ViewWiki/index.php/How_to_recover_or_view_the_encrypted_pre-shared_keys_on_the_PIX/ASA_Firewall

[ronald.ramzy]

Thanks Eddie.

Is there a tool to conver the configuration form 6.2 to 8.0

[eddie.mitchell]

There is a PIX to ASA configuration conversion tool and there is a conduit to ACL converter if your PIX config still uses conduits.

Both tools are published by Cisco.